NPS Discarding RADIUS request from Cisco switch (802.1x)
Last few weeks I've been busy to get the following to work:- Cisco 2960 switch as the suppliant - Another Cisco 2960 as the authenticator switch - The supplicant is only able to send MS-EAP MS-ChapV2...
View ArticleWPA2-Enterprise Radius Authentication Windows Server 2008 R2
Hello,I have tried a few online tutorials for providing secure wireless access. I currently have a server running Server 2008 R2 that has RRAS, NAP, and AD CS installed on it. My goal is to create a...
View ArticleThe recommended number of IP addresses to block, which can be added to one...
Good afternoon.Interested in the question,I need to createa ruleto denyaccess the serverwith thespecified IP address.List oflarge-about 50 thousand.So howcan Iadd an IPruleblockingconnectionsfrom IP...
View ArticleHP Procurve 5412zl with Windows 2012 Radius NPS
Hi Everyone, I'm having some trouble with setting up 802.1x for wired conneciton. Essentially, I'm starting out by testing a mac book pro connect via the HP Procurve 5412zl switch and the switch is...
View ArticleEvent 6273 after moving NPS from 2008r2 to 2012r2
I exported the NPS config on our 2008r2 server and imported it into the 2012r2 server. The IP was also eventually migrated from the old server to the new server.Now, any clients that try to...
View ArticleProblem
I am trying to setup Single Sign On between wireless and a network filter. The filter requires the <Framed-IP-Address> to be in the NPS servers (Server 2012 R2) log files. I have manually...
View ArticlePPTP VPN Error 619
Ive recently been having problems with my users not being able to connect to our domain PPTP VPN (running on Server 2008 R2).It was configured about 2 years ago and has been working great! Now for some...
View ArticleClik here to view.
NPS wireless Authentication.can't connect to domain Wi-fi using Windows 7....
Server 2012 R2 (NPS)Client: Windows 7 UltimateWindows 7 clients can't connect to domain wireless. The strange thing is that Windows 8-8.1 and Mobile devices can connect without problems.GPO...
View ArticleSetting 802.1x with window 2008, switch 2950 and client
My company intend implement a system with follow diagram: Client --- Cisco catalyst Switch 2950 (support 802.1x)--- window server 2008 (RADIUS server) or Client ---- Access Point (support 802.1x) ---...
View Articleconfiguring wired 802.1x with Cisco 2950 and NPS 2012 problem
Hi,I am trying to setup wired authentication on my corporate network. For testing purposes, I have setup a Cisco 2950 switch for RADIUS authentication.On the first day of the test, access messages were...
View Article802.1X EAP-TLS User Certificate Errors
I'm trying to implement 802.1x using EAP-TLS to authenticate our wireless users/clients (Windows 7 computers). I did a fair amount of research on how to implement this solution and everything seems to...
View ArticleGiving Non-Admin users acces to Network Device Management
Not really sure that this is the proper place to post this since, MS has made the Forum selection kind of limited and confusing in my honest opinion.As the Title implies, I am looking to give rights to...
View ArticleMac Authentication Bypass suddenly fails
Hello all,I am having an issue with MAB failing all of a sudden. When I look at the logs, I see that it's due to an invalid auth type (I see IAS_INVALID_AUTH_TYPE in the logs). MAB used to work, and...
View ArticleNPS and Cisco ASA 5510 - AnyConnect Certificate based authentication
Hi everyone,Hoping someone can help please.We're trying to go for a single VPN solution at our company, as we currently have a few through, when buying other companies.We're currently running a 2008 R2...
View ArticleCisco asa 5505 with nps
I'm trying to setup our new cisco asa vpn device with nps authentication. Is there a guide on how to do this, I can't seem to get it setup. We do have 2003 setup this way already, but it was done by...
View ArticleNAP DHCP not getting IP and "netsh nap client show group" shows no results
Hey guys, I have just set up DHCP basen NPSand I get no IP address on my machine, which should be compliant (just firewall is being checked). I have on both enforcement client up. Logs on NPS shows...
View ArticleHow to pass two rule names in netsh firewall set rule command
Hi All, how can I use set rule to perform an action on two rules i.e. how can I disable two firewall rules with just one command, I want to pass both rule names in Name parameter in the command, my...
View ArticleControl Panel Firewall GUI and Netsh Return Different Firewall States
I am seeing an issue on some of our machines relating to DirectAccess and the firewall. For DA to work, the public and private firewall profiles must be set to on. Group Policy enforces this for us and...
View ArticleAdvanced Firewall. Multiple entries for remoteip cannot be defined in "netsh...
<!-- [if gte mso 10]> <mce:style>The online "netsh advfirewall firewall" manual reads as follows: “Multiple entries can be specified forremoteip by separating them with a comma.”In both...
View ArticleEncryption type with SSTP
I have windows server 2012 R2 with RRAS role. I've set up VPN with IKEv2 and SSTP.When client connects with IKEv2 I can see his status in RRAS snap-in and his encryption status in "IPSec: AES 256". But...
View Article